Low Noise Clean Room Equipment , HEPA Filter Remote Control BSC Class II Type A2

Class II Biosafety Cabinet / Biosafety Cabinet Manufacturer / Low Noise Biosafety Cabinet

Features of Class II Biosafety Cabinet:

1. Operations on three sides and side wall panels unibody structure, leave some space

at the bottom, easy to clean, to avoid cross infection.

2. Front window: when using optical perspective is clear, clean and disinfect does not negatively

impact burst-proof tempered glass, tempered glass production, glass thickness ≥ 5 mm.

3. Cabinet: four two-tier structure, all Studio and the collecting tank to use imports 304 stainless

steel materials.

4. Blower/motor maintenance and disassembly, replacement HEPA filters are available from all

safety cabinets.

5. Containment of the Cabinet: the cabinets pressurized to 500Pa, keep the air pressure

is not lower than 450Pa after 30min.

6. Cabinet stability: a countertop Center load 23kg unload, countertop must not bend downward.

7. Alarm system: safety Cabinet front window opening height exceeds a set level, decreased

safety Cabinet flow velocity and flow fluctuation of air flow velocity in excess of their nominal

value of 20%, the interlocking system startup, sound, light, sound and alarm.

8. HEPA filter integrity: scan filter at any point of the leak rate of less than 0.01%.

9. Cannot scan filters detect leak rate of less than 0.005% personal protection: percussive sampler

number ≤ 10CFU/.

10. Slit type sampler number ≤ 5CFU/product protection: colony count ≤ 5CFU/cross

infection: colony count ≤ 2CFU/.

Technical Parameters of Class II Biosafety Cabinet: